Farm Equipment - Upon reinstalling D15 II head

Print Page | Close Window

Upon reinstalling D15 II head

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28747
Printed Date: 03 Mar 2025 at 3:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Upon reinstalling D15 II head

Posted By: captaindana
Subject: Upon reinstalling D15 II head
Date Posted: 08 Apr 2011 at 3:35am

do any of the intake or exhaust studs require sealing on the threads that thread into the head? Any antiffreeze contact? Thanks, Dana

Replies:

Posted By: Dick L
Date Posted: 08 Apr 2011 at 9:46am

There is not supposed to be.

Bu, Bu But since it most likely has been in more hands than yours you might want to push a wire into each hole to make sure someone had not got over handy with a power drill and went a tad deeper than necessary and struck water.

Posted By: captaindana
Date Posted: 09 Apr 2011 at 7:17am

thanks Dick!