Farm Equipment - D17 Series IV Air Breather

Print Page | Close Window

D17 Series IV Air Breather

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28656
Printed Date: 02 Mar 2025 at 2:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Series IV Air Breather

Posted By: Sitesstables
Subject: D17 Series IV Air Breather
Date Posted: 06 Apr 2011 at 10:40am

Mine is missing the filter and the cap.. It lays sideways and have looked all over the net to find what I need.. any help would be great!!

-------------
1965 D17 Series IV

Replies:

Posted By: Skyhighballoon(MO)
Date Posted: 06 Apr 2011 at 11:31am

Matthew - on the air cleaner cap, several vendors here carry them. See this page from Tony's Tractors for an example:

http://www.tonystractors.com/acs.htm#accapscups - http://www.tonystractors.com/acs.htm#accapscups

The air filter is Fram CA229. Not hard to find - Google it. I'm sure Napa can cross the Fram number over to their part numbers as well. Mike

-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers

Posted By: Sitesstables
Date Posted: 06 Apr 2011 at 11:36am

Thanks Mike!!! when you getting the ballon out again? love your videos

-------------
1965 D17 Series IV

Posted By: Sitesstables
Date Posted: 06 Apr 2011 at 11:41am

Mike I see the air cleaner cap ( for on top of hood) but on the large end peice fr the filter

-------------
1965 D17 Series IV

Posted By: sandylakeimplement
Date Posted: 06 Apr 2011 at 12:14pm

There was no actual cap. A bar with a pushbolt went from side to side in the slots. Originally there was a canvas or rubber disc attached to the bar to prevent air from being pulled into the housing from the back although it would still be filtered. Wouldn't be too hard to fab one. Bill

-------------
Sandy Lake Implement
Sandy Lake, PA
724-376-2489
www.sandylakeimp.com
FIND US ON FACEBOOK

Posted By: Sitesstables
Date Posted: 06 Apr 2011 at 12:57pm

Bill do you have a picture of what it looks like?

-------------
1965 D17 Series IV

Posted By: Ray
Date Posted: 07 Apr 2011 at 10:27pm

Hi: I have the part that Bill says you need. 785-353-2392

Posted By: Sitesstables
Date Posted: 08 Apr 2011 at 5:32am

Ray i will call you Monday, as I am in my office all weekend

-------------
1965 D17 Series IV