Looking For...
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28625
Printed Date: 01 Mar 2025 at 12:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Looking For...
Posted By: HagerAC
Subject: Looking For...
Date Posted: 05 Apr 2011 at 9:51pm
I am looking for a set of front axle knees/spindles for my 180D. I thought I had a pair located but they were only able to locate 1 of them and I really need 2. Knees from a 185 are the same so if anybody in my area has a set please let me know. I am located in SE MN, but would be willing to travel a little bit if the price was right. The salvage yards I have tried want an arm and a leg for a pair.
-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52
|
Replies:
Posted By: Matt MN
Date Posted: 06 Apr 2011 at 7:37am
What is wrong with the one's you have? If it is the bushings I would have a machinist build some new bushings to fit in the wore knee's, then they would be nice and tight again. used knees can be wore out the same as what you have? just thinking?
-------------
Unless your are the lead horse the scenery never changes!!
|
Posted By: HagerAC
Date Posted: 06 Apr 2011 at 7:45am
Well, mine, the bottoms are worn badly, must have worn through the thrust washers, and then it started wearing on the bottom end of the tube, and they are nowhere near level on the bottom, so I can't add any thrust washers to tighten them up.
-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52
|
Posted By: HagerAC
Date Posted: 06 Apr 2011 at 11:18am
Found a pair today, for a decent price with spindles.
-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52
|
|