Print Page | Close Window

Starter tank Picture

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28453
Printed Date: 01 Mar 2025 at 10:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Starter tank Picture
Posted By: Fred in Pa
Subject: Starter tank Picture
Date Posted: 03 Apr 2011 at 10:19am



Replies:
Posted By: caRon
Date Posted: 03 Apr 2011 at 11:34am

Fred, looks like a nice reproduction. I've always been curious about these tanks because it was an option in my ca manual. Any pics out there of a CA or any other model with starter tank? Ron



-------------
CA Tractor


Posted By: R Aiken
Date Posted: 03 Apr 2011 at 11:35am
That is purty.  The tank on my 41 C , looks as good in the hood, but it was rusted so bad I cut off the bottom half. 


Posted By: R.W
Date Posted: 03 Apr 2011 at 11:36am
Whats a starter tank for?


-------------
In Search Of: 1958 Allis Chalmers D17 Diesel serial #9643D


Posted By: Fred in Pa
Date Posted: 03 Apr 2011 at 11:40am
The starter !!!  LOL !!! If you got a all fuel or kero set up on your trator this was the tank that your gas went in for starting the cold engine that was not up to operating temp.


Posted By: R Aiken
Date Posted: 03 Apr 2011 at 11:44am
Originally posted by R.W R.W wrote:

Whats a starter tank for?
It is to start a tractor on gas to warm up and then switch to keorsine, or lower priced distilent, yesar ago.


Posted By: R.W
Date Posted: 03 Apr 2011 at 11:45am
Ok thats what I was thinking. lol

-------------
In Search Of: 1958 Allis Chalmers D17 Diesel serial #9643D


Posted By: caRon
Date Posted: 03 Apr 2011 at 11:52am

What engine differences were on a fuel/kero tractor? carburetion, compression? or nothing at all, just get to operating temp and switch over? Ron



-------------
CA Tractor


Posted By: dannyraddatz
Date Posted: 03 Apr 2011 at 12:31pm
My understanding was that glow plugs were not around and to get the tractor to fire up in the cold was hard to do. So you started on a higher octane fuel and when up to operating temperature it would run fine on the other fuels. http://%20 -  

-------------
Danny Raddatz


Posted By: Ed in TX
Date Posted: 03 Apr 2011 at 12:51pm
I think the kerosene/distillate tractor used a different manifold to preheat the mixture. Somebody correct me if I'm wrong. I have a dual fuel B but I don't think I have the right manifold to run both fuels. Other than that I'd also like to know if there was any internal changes to the engine.


Posted By: everett048
Date Posted: 03 Apr 2011 at 2:57pm
Lower compression


Posted By: everett048
Date Posted: 03 Apr 2011 at 2:58pm
Also different jets and venturi in carb.


Posted By: chllngr528
Date Posted: 03 Apr 2011 at 3:26pm
Originally posted by everett048 everett048 wrote:

Lower compression
 
Why would it be lower compression? I would think it would have to be higher compression as kero is closer to diesel then it is to gasoline. If your running on kerosene the enigine would be using compression ignition instead of spark.
 
From what I understand the dual fuel tractors have a exaust manifold that heats the fuel. Now when you heat kerosene you lower its flash point so maybe its not running on comperssion ignition?
 
On the other hand I could see why they would've lowered the compression ratio as I think that kerosene has more energy then gas and that power may have reaked havoc on the bottem end.
 
I would like to know the answer as my WC is a dual fuel.


Posted By: wfmurray
Date Posted: 03 Apr 2011 at 4:09pm
Dad had a duel fuel  It had starter tank and baffle in exhaust raifdator shuter and pet cock on side of oil pan. Start up close shutter and start on gas when hot stift over from gas to kersene open shutter enough to keep heat up. End of day open pet cock drain 1 qt of oil  to get rid of blow by and add 1qt. Less power on kersene  He knocked out baffle in exhaust  run on gas had more power didn,t have to add extry oil . Was not enough difference in fuel price  to pay to use kersene and run cool and didn,t use shutter.


Posted By: wfmurray
Date Posted: 03 Apr 2011 at 4:13pm
PS It was a WC  1942  on steel no starter or lights , just a mag and crank.


Posted By: norm[ind]
Date Posted: 03 Apr 2011 at 4:42pm

  people were a lot mre cost conscience back then kero was lot cheaper than petro  not a noticeable difference in power  we bought man5 semi loaDS OF TRACTORS FROM FLA. 1960 MODELS TOO  was told the reason for them was the hired help would help them selves to fuel for their  trucks in the back of plantations too   they would not do that with kerosene another reason  you fellas are onlytalking about your area[huh]

 



Posted By: dannyraddatz
Date Posted: 03 Apr 2011 at 7:05pm
This information is from my WD 45 service manual.


-------------
Danny Raddatz


Posted By: Chalmersbob
Date Posted: 03 Apr 2011 at 9:18pm
I always thought that the dual-fuel WD45 was only LP and Gas. The book stated that if you ran out of one you could run on the other fuel. Bob


Posted By: Norm Meinert
Date Posted: 04 Apr 2011 at 2:07pm
We have offered these starter tanks for a couple years. We have them available on our website at http://www.normsactractors.com - www.normsactractors.com or you may call me at 1-815-238-4506.
 
Norm


Posted By: WC Dale
Date Posted: 04 Apr 2011 at 2:28pm
I bought a manifold at a swap once that had the angle on the right hand side of the exhaust like the one pictured on the left. This is the first time I've seen anything like it. Looks like the aircleaner with the snout coming out like that was the reason for it. Is this how WD45 air cleaners were made? The manifold I have has the standard out the side cover as for an unstyled WC.


Posted By: Dave in PA
Date Posted: 04 Apr 2011 at 3:50pm
Fred, sorry I have to ask you a question?  If the "starter tank" is to start the starter, then does Steve at B&B sell the wiring harness/fittings for this?? 
You guys always have the correct answers???  LOL


Posted By: Tricky Dickie
Date Posted: 05 Apr 2011 at 12:04pm
It's sad that so many younger collectors do not understand dual fuel, kerosene, tractor fuel or tvo tractor engines. By the way, I explain the difference between flash point and octane number and their relevance to compression ratio in my reply to another post entitled "dual fuel tractors". All my tractors are TVO fuelled machines - you can keep those diesels!
Tricky Dickie



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net