Construction and other equipment - HD7 Filter part numbers???

Print Page | Close Window

HD7 Filter part numbers???

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28355
Printed Date: 27 Jul 2025 at 4:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD7 Filter part numbers???

Posted By: JRJRFM
Subject: HD7 Filter part numbers???
Date Posted: 01 Apr 2011 at 5:30pm

Can anyone supply the current NAPA or other numbers for engine oil filters, and fuel filters for the HD7 Diesel? The engine is a detroit 3-71 Thanks!!!

Replies:

Posted By: Tad Wicks
Date Posted: 01 Apr 2011 at 8:52pm

I went through this about a year ago on my 7, I had a dickens of a time because someone had installed the wrong fuel filters and there are some that look right but are not. I finally got it figured out and the numbers are current, the originals were the sock type and have been updated. I have to do a bit of research but I will get the fuel filter numbers for you. Tad

Check out my HD7

http://www.youtube.com/watch?v=T1KGvx55kjc

Posted By: gemdozer
Date Posted: 02 Apr 2011 at 5:49am

The 371 oil filter #5572425 by pass P-117 or 5573014 full flow PF-132

FUEL FILTER 5192854 6" or 5178982 4"

Posted By: Tad Wicks
Date Posted: 02 Apr 2011 at 11:48am

Wix oil and fuel filters, drop the first digit from the Wix to get the Napa number,

Oil -51005
Primary Fuel -33061
Secondary Fuel ser#17478 up -33511
Secondary Fuel ser#17478 -33043

If I recall correctly there are gaskets (quad seals) for the filter to base along with gaskets for the cup (they should be included with the filter) and there should be a spring and washer assembly to retain the filter inside the housing on the secondary filter, be very careful on the primary, there is one almost exactly the same but a bit longer by about .250, it will crush the filter when installed. Hope this helps Tad

Posted By: JRJRFM
Date Posted: 05 Apr 2011 at 11:36pm

Hi! Thanks for all the info! I just got the replacement hydraulic pump installed and serviced the transmission and final drives, so now all she needs is an oil and filter change so I can take her to this years military show in western Idaho!!Here's a link:: http://p8.hostingprod.com/@imvpa.idahomotorpool.com/pictures/flyer10mvpa.jpg

Posted By: Tad Wicks
Date Posted: 07 Apr 2011 at 9:21pm

When you are all said and done I am sure we would all like to see pictures of the event. Does you 7 have the Baker blade or the Garwood? Thanks Tad