Print Page | Close Window

Narrow front C steering problems.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28237
Printed Date: 01 Mar 2025 at 1:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Narrow front C steering problems.
Posted By: Glockhead SWMI
Subject: Narrow front C steering problems.
Date Posted: 30 Mar 2011 at 5:15pm
I have my Dads C here and the front end has a bad case of the wobbles. The worm gear in the steering box is part of it but the front end is really loose right at the pedestal. Is there an adjustment or am I going to have to replace parts? I may try and tear into it this weekend and would like to know what I am getting into. Thanks.



Replies:
Posted By: Dakota Dave
Date Posted: 30 Mar 2011 at 6:26pm

First check your wheel bearings and tire pressure. You can take off the pedistal and remove shims to tighten it up. You may have to take out the pedistal shaft and change bearings and races. the side steering shaft can be shimmed to incerase gear engagment. and the steering box could be one of two types. The ross boxes usually need new pins and the gemmers usually need the comb gear welded up and reshaped. Good luck.



Posted By: Glockhead SWMI
Date Posted: 31 Mar 2011 at 7:12pm
Thanks Dave. I put on my list of things to do for the weekend. Hopefully the weather holds out.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net