Track piece for HD5
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28166
Printed Date: 12 Nov 2024 at 10:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Track piece for HD5
Posted By: Slade (TN)
Subject: Track piece for HD5
Date Posted: 29 Mar 2011 at 12:18pm
|
I have a customer needing this piece for his dozer, the spacer and pin.....can anyone help??
Slade 615-542-6999
 |
Replies:
Posted By: Coke-in-MN
Date Posted: 29 Mar 2011 at 12:25pm
|
Trying to figure out what it is ??? Somehow I can not recall seeing anything like that on HD5B or HD5G that I have worked on . Is it part of dozer mounting hardware ? ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Slade (TN)
Date Posted: 29 Mar 2011 at 1:05pm
| Supposed to be where the blade arm pivots......waiting on another pic, thanks Coke |
Posted By: Coke-in-MN
Date Posted: 29 Mar 2011 at 1:12pm
|
If that is the attaching point at the rear axel outer housing bearing where the side push arms for the dozer blade pivots , then it is not a AC part but aftermarket to the dozer frame.
On my HD5B the end of the arm had a ball type fitting that bolted together in 2 pieces and a ball fixture that bolted over the outer bearing end cap on axel housing. ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Slade (TN)
Date Posted: 29 Mar 2011 at 2:05pm
Here are a few more pics....
    |
Posted By: M Diesel
Date Posted: 29 Mar 2011 at 4:10pm
| I lost a trunnion cap not long ago, same side even, likely for the same reason. Only real answer was to have a copy made from the left side. Hope your luck is better. |
Posted By: michale34
Date Posted: 31 Mar 2011 at 9:33am
| I lost one for a hd 5 we had and I had a one made we took the track off and misplaced them never did find them |
Posted By: Coke-in-MN
Date Posted: 31 Mar 2011 at 10:42am
|
Just a idea but the track is to tight and excess wear on parts is going to result if run to long like that. Should be a little more slack in it to at least have give between top roller and front idler and sprocket. both sides show this over tight condition ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: dadsdozerhd5b
Date Posted: 31 Mar 2011 at 6:48pm
|
the right side track is actually off the rollers and the top of the track at the idler is tilted toward the dozer. something definately wrong besides the blade. i would take a metal detector and backtrack the path and try to find it. you could not have lost it that long ago. the wedge is easy to make if you find the trunion half. tracks are definately too tight but may need to be on the tight side if you are working on side hills. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |