Farm Equipment - WD45 bearings

Print Page | Close Window

WD45 bearings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=28110
Printed Date: 28 Feb 2025 at 9:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 bearings

Posted By: Dakota Dave
Subject: WD45 bearings
Date Posted: 28 Mar 2011 at 3:04pm

Does anyone have a timkin bearing number for the WD45 axle bearings inner and outer?

Replies:

Posted By: dannyraddatz
Date Posted: 28 Mar 2011 at 6:09pm

Dave,

Mine were so bad I bought kit #70228458 from AGCO for 72.25 each. The kit includes AGCO part numbers 70202103, 70202105 (Washers), 15288A (Felt), 2720 & 15250 (Cups), 2776 & 15118 (Cones) I am sure you may be able to cross reference these numbers. These are numbers fo9r the front axle bearings

Danny

-------------
Danny Raddatz

Posted By: Dakota Dave
Date Posted: 28 Mar 2011 at 6:47pm

I'm sorry I ment the rear axle. The local JohnDeere dealer had bearings to fix the front in stock. I just didn't want to take the rear apart to find out what bearings I need. I have Pulled the Cap and no shims are present to tighten them.

Posted By: d17brown
Date Posted: 28 Mar 2011 at 8:44pm

well, i priced theese bearings from agco and they wee 800$, no lye, priced at bearing store and they were 550$, theese are the ones on ouside of axel

Posted By: Chris/CT
Date Posted: 28 Mar 2011 at 8:57pm

I have some shims loose if needed.

Posted By: ac612bill
Date Posted: 28 Mar 2011 at 10:30pm

I have a shelf of NOS Allis bearings, I can check tomorrow and see what I have. They will be very inexpensive if I have them.

Posted By: ac612bill
Date Posted: 29 Mar 2011 at 6:55pm

I found some NOS bearings for the wd45. All are in opened allis boxes or cans.

The outer bearing is:

Cup- Allis# 210241- I have 3- 1 is A Bower #382

The other 2 are Timken #382

Cone - #218285-I haven't found yet. I also have some bearings in Timken, Bower etc. boxes but I have no way to crossreference. If Someone can supply a # for Timken or Bower I may still have what you need.

The inner bearing is:

Cup- Allis#209890 -I have 1 so far - 1 Timken#14276

Cone- Allis#209889- I have 3- 1 Timken#14138A

The other 2 are Bower#14138A

These bearings have been on shelfs since the 60's, Some are coated with cosmolene, some of the cones have very minor small rust spots, would easily buff off on a wire wheel. I'll take $50 for all seven items plus shipping USPS in flat rate box. I Used to sell Allis NOS parts on Ebay but it has been a while, need to get back to it. Click where it has my ID ac612bill and send me a message if you want them.

Posted By: Chris/CT
Date Posted: 29 Mar 2011 at 7:12pm

Bill, Funny you show up here on Forum, I was just [yesterday] looking at some old papers [ with some NOS I bought from you many moons ago] that you and I had sent back/forth. I wondered if you were still around. Nice to hear from you, Chris/CT

Posted By: ac612bill
Date Posted: 29 Mar 2011 at 7:16pm

Yea I'm still around, just older, balder, more lazy and forgetful.