Extentions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=27671
Printed Date: 28 Feb 2025 at 3:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Extentions
Posted By: D17JIM
Subject: Extentions
Date Posted: 21 Mar 2011 at 11:19am
| I purchased a single extention for my SC blade and found that the bottom share? part was worn a lot more than my main blade. Share is the only word I could think of. There is about an inch difference. Where could I get a replacement for it? I just need the short piece.I thought about welding a piece to it but it wouldn't be as hard. |
Replies:
Posted By: john(MI)
Date Posted: 21 Mar 2011 at 11:28am
|
Don't know about the extensions but the balde edge can be taken off and turned over to use the other edge. Might look at that as an option! ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: D17JIM
Date Posted: 21 Mar 2011 at 11:47am
| THX John I'll check it out |
Posted By: Chris/CT
Date Posted: 21 Mar 2011 at 11:53am
| I have set of new 18" cutting edges for sale. Selling low to move them out. |
Posted By: Chris/CT
Date Posted: 21 Mar 2011 at 11:55am
|
Posted By: Skyhighballoon(MO)
Date Posted: 21 Mar 2011 at 11:58am
|
Based on Chris's pictures of the extension cutting edges, don't see how you'd turn them over. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: D17JIM
Date Posted: 21 Mar 2011 at 12:17pm
| How much wear are on these ?? Whats the price. I really only need 1. |
Posted By: Skyhighballoon(MO)
Date Posted: 21 Mar 2011 at 12:33pm
|
Jim - if you take one I might be interested in the other one as I cut my 18 extension in half to make 2 nine inch extensions for my blade. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Chris/CT
Date Posted: 21 Mar 2011 at 12:51pm
| New edges, no wear. $30+ S/H for the pair, want to sell as a pair. |
Posted By: D17JIM
Date Posted: 21 Mar 2011 at 1:33pm
| Mike that would be fine with me if Chris will split them. How about it Chris ?? |
Posted By: Skyhighballoon(MO)
Date Posted: 21 Mar 2011 at 3:39pm
|
Jim - sound like a plan to me...you have a PM back. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |