Farm Equipment - need parts

Print Page | Close Window

need parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=27584
Printed Date: 27 Feb 2025 at 11:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: need parts

Posted By: abbaschild95
Subject: need parts
Date Posted: 19 Mar 2011 at 7:20pm

i have several questions about finding original parts... the wc im working on needs new battery cables. are there specific cables i should be looking for? specific length ect? and also where would i find the same bolts originally used to bolt on the wheel weights? i want them pretty much the same as they used before. and lastly how do i sand cast iron down so i can get the pits out without sanding out the lettering on it? thanks!

-------------
Great-granfather's WC---- hopefully many more to come!

Replies:

Posted By: Brian Jasper co. Ia
Date Posted: 19 Mar 2011 at 7:32pm

Sand blasting would work well on the lettering areas. If you're staying with 6v you need to use at least 02 gauge cables. It will act like the battery is run down with anything smaller. Length? Can't really say on that.

-------------
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford

Posted By: abbaschild95
Date Posted: 19 Mar 2011 at 7:34pm

im mostly worried about whats its wrapped in and the length. not sure if it was just wrapped in a regular rubber/plastic or what? i have no idea how much is original on this tractor...

-------------
Great-granfather's WC---- hopefully many more to come!

Posted By: abbaschild95
Date Posted: 19 Mar 2011 at 7:47pm

i also need the clutch pedal assembly. everything above the outside main rod... oktractor never returned my email so i need to look elsewhere.

also... where was the kill switch located? or was there one? there is a rough one jerry-rigged but its for sure not original...

-------------
Great-granfather's WC---- hopefully many more to come!

Posted By: dannyraddatz
Date Posted: 19 Mar 2011 at 8:09pm

Here was someone who helped many people before.

DOC'S EQUIPMENT
1425 9TH STREET
LACON IL 61540
PHONE 309-246-2900
FAX 309-246-2902
New and Used Allis Chalmers parts.

-------------
Danny Raddatz

Posted By: abbaschild95
Date Posted: 19 Mar 2011 at 8:13pm

will they ship to colorado... i suppose ill just call and ask.. thanks!

-------------
Great-granfather's WC---- hopefully many more to come!

Posted By: Chalmersbob
Date Posted: 19 Mar 2011 at 8:38pm

the orginal kill switch was mounted on the rear of the mag, and connected with a rod, similar to the choke rod, to the steering column next to the choke. The switch consisted of 2 thin copper spring contacts. 1 was mounted to the mag as a ground and the other one was insulated and connected to the ground wire from inside the mag. To shut it off you pulled on the rod causing the 2 contacts to touch. Bob

Posted By: abbaschild95
Date Posted: 19 Mar 2011 at 8:54pm

crud the mag was traded out for a distrubutor so how would i implament the same idea to create a kill switch? follow the wires on the jerry rigged one and put a pull type rod on it?

-------------
Great-granfather's WC---- hopefully many more to come!