OK last post about hyd pump
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=27570
Printed Date: 27 Feb 2025 at 11:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: OK last post about hyd pump
Posted By: captaindana
Subject: OK last post about hyd pump
Date Posted: 19 Mar 2011 at 4:45pm
on the 19. I had put it back together and was compressing the big spring with the pump in a vise when something hit me on my foot. It was the pin that holds the rollers onto the assembly. I then took off the 4 follower assemblies and tig welded the pins so they can't come out now. Once a pin comes out and the roller falls off all heck breaks loose!
|
Replies:
Posted By: Chalmersbob
Date Posted: 19 Mar 2011 at 9:05pm
| So what are you going to do about the lobes that were destroyed? Bob |
Posted By: Dean(IA)
Date Posted: 19 Mar 2011 at 9:12pm
|
You may want to flatten 2 8 P galvanized nails and then hold down two cam followers and insert the nail to hold 2 down with one nail. Let the heads of the nails go out past the edge of the mounting pad so that after you get the pump installed and the nuts just started, you can pull the nails out. I hope this description is clear enough to follow. HTH |
Posted By: TedBuiskerN.IL.
Date Posted: 19 Mar 2011 at 9:16pm
|
Dean, your method works with a WD/WD45 pump, but this is the belly pump on a D19. ------------- Most problems can be solved with the proper application of high explosives. |
Posted By: Steve M C/IL
Date Posted: 19 Mar 2011 at 11:35pm
| Recon Dana got in there with an angle grinder and "trued" em up? |
Posted By: captaindana
Date Posted: 20 Mar 2011 at 6:41am
| I did grinf, file and sanded but I am still not sure what we are going to do. Thanks, Dana |