Farm Equipment - Question for mechanics

Print Page | Close Window

Question for mechanics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=27082
Printed Date: 27 Feb 2025 at 7:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Question for mechanics

Posted By: BWinMO
Subject: Question for mechanics
Date Posted: 10 Mar 2011 at 3:20pm

D 19 gas cam gear has 2 different timeing marks on it 1 dot on one side then 180* 2 dots which do I line up with crank gear dot. If I line the 1 dot with crank when you turn the crank a revilution to hte 2dot you are off 1 tooth. So which do I line up the single dot or the double dot with crank.

Thanks in advance B W

Replies:

Posted By: powertech84
Date Posted: 10 Mar 2011 at 6:30pm

Which ever one puts the cam lobes for cylinder one on the power stroke.

Posted By: Allen Dilg
Date Posted: 10 Mar 2011 at 8:34pm

Hello BW I'm note sure on this motor ,but I would see if the 2 dots lineup on each side of the single dot. Just a guess

Posted By: BWinMO
Date Posted: 10 Mar 2011 at 9:14pm

The 2 dots are on the same gruve one above the other.

Thanks B W

Posted By: Matt (Jordan,MN)
Date Posted: 11 Mar 2011 at 12:27am

If i rember right line up the single dot with the crank. The 2 dots are for the injection pump on the wd45 diesel. Matt