Farm Equipment - What is a WD, WD45 tire/rim worth?

Print Page | Close Window

What is a WD, WD45 tire/rim worth?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26996
Printed Date: 27 Feb 2025 at 4:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: What is a WD, WD45 tire/rim worth?

Posted By: Dave in il
Subject: What is a WD, WD45 tire/rim worth?
Date Posted: 08 Mar 2011 at 11:01pm

I know where a pair of tires with rims & centers off of a WD or WD 45 are. Tires aren't real good and I'm not sure about the rims as they're stacked one on the other.

What would a reasonable offer be?

Replies:

Posted By: JohnCO
Date Posted: 08 Mar 2011 at 11:34pm

Ditto

-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant

Posted By: CTuckerNWIL
Date Posted: 09 Mar 2011 at 12:14am

Tires being not good and rims questionable, they're worth the scrap price of the wheel centers maybe.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: john(MI)
Date Posted: 09 Mar 2011 at 7:20am

I don't think they are worth that by the time you EVER can get rid of the scrap tires.

-------------
D14, D17, 5020, 612H, CASE 446

Posted By: Dave in il
Date Posted: 09 Mar 2011 at 9:14am

Ok, I don't think the tires are junk, just well worn. I can't tell if they are holding air because they're setting on an old flatbed stacked one on top of the other.

I could use them if they hold air, they look better than the ones on my WD. Or I could use one of the ceners for an early D17.

I'm thinking offer $50 and go to $100 for the pair?

Posted By: Chad(WI)
Date Posted: 09 Mar 2011 at 9:28am

If you priced new 12 or 13" X 28 rims, you'd bring them home even if all that was left to the tires was the sidewalls! I just repaired a set of 13's that had the typical rot around the stems. A few hours and some patience can save you a lot of scratch. Don't forget that you have all of the clamps as well....and maybe the stops are there? If you could get the pair for $100....I'd say you got a steal. JMHO.

Posted By: Brian F(IL)
Date Posted: 09 Mar 2011 at 11:36am

I agree with Chad. The eccentric clamps and stops on the PA rails are worth something. I'd like to find some eccentric clamps for a CA (they are different from a WD or WD-45).