8030 3pt hitch installation/option
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26993
Printed Date: 27 Feb 2025 at 8:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8030 3pt hitch installation/option
Posted By: Amos
Subject: 8030 3pt hitch installation/option
Date Posted: 08 Mar 2011 at 9:21pm
| I looked at a 8030 without 3pt hitch on it. It appears to have been like this from new. What is required to add the 3pt hitch to it? Does anyone know where I could get these parts? Used preferably. It appears there is no valve nor lever in the cab, as well as the arms and lift rams and upper link mount bracket. |
Replies:
Posted By: darrel in ND
Date Posted: 08 Mar 2011 at 10:38pm
| I never seen an 8000 series without a 3 PT. Didn't know they ever made em that way |
Posted By: Amos
Date Posted: 09 Mar 2011 at 6:12am
| Took me by surprise as well. |
Posted By: DrAllis
Date Posted: 09 Mar 2011 at 6:26am
| I'd guess you'd need a completely different lift arm housing including the internal ram and rockshaft along with a 3 pt hyd valve and all the linkage and then the torsion bar down below which would require removal of one of the final drive assemblies to install it. After all that is in place, then you could hang the 3 pt lift arms, links and lower draft arms. |
Posted By: Bill(MO)
Date Posted: 09 Mar 2011 at 7:01am
| You could order an 8000 without 3 pt just the drawbar. Drawbar only with 2 remotes had a deduct of $2239.00. Weight was -661#. |
Posted By: Matt MN
Date Posted: 09 Mar 2011 at 7:32am
Is this a picture of one without a 3 Point.
 ------------- Unless your are the lead horse the scenery never changes!! |
Posted By: Amos
Date Posted: 09 Mar 2011 at 4:20pm
|
Anyone know where I can find the parts Dr Allis listed?
Who has a wrecked 8000 series that you know of?
|
Posted By: DrAllis
Date Posted: 09 Mar 2011 at 5:19pm
| All the parts from a 7040-7045-7060 would fit except the valve and hyd lever/linkage. |
Posted By: automaticdave
Date Posted: 09 Mar 2011 at 7:29pm
| Amos try Fawcett Tractor Supply they have a 8030 in the yard. |
Posted By: Ron(AB)
Date Posted: 10 Mar 2011 at 6:01pm
|
You can get an after market 3 pt. hitch that will bolt right on very easy. In Alberta - WSI Sales @ 780 999 3523 definitely can help you.
Ron |