Farm Equipment - One-Ninety PTO lever o-ring

Print Page | Close Window

One-Ninety PTO lever o-ring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26887
Printed Date: 27 Feb 2025 at 3:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: One-Ninety PTO lever o-ring

Posted By: Tractor Addict
Subject: One-Ninety PTO lever o-ring
Date Posted: 06 Mar 2011 at 11:22pm

Hello everyone!

I need some help with my latest project, a 1964 One-Ninety diesel. Oil is pouring out of where the PTO lever enters the transmission housing. The parts book shows an o-ring for a seal. Could anyone tell me the easiest way to install that o-ring? I really hope that I don't have to split the tractor.

Thank you for any information.

Replies:

Posted By: sandylakeimplement
Date Posted: 07 Mar 2011 at 12:47pm

Sorry but no easy way. The internal shifter lever is pinned to the shaft and must be removed so the control shaft can be pulled out. Not enough room to work thru the side cover at the power director-clutch pac takes up most of the room. Bill

-------------
Sandy Lake Implement
Sandy Lake, PA
724-376-2489
www.sandylakeimp.com
FIND US ON FACEBOOK

Posted By: Tractor Addict
Date Posted: 07 Mar 2011 at 7:34pm

Thank you very much for your reply. I was afraid that would be the answer.