Farm Equipment - Snap coupler dimensions

Print Page | Close Window

Snap coupler dimensions

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26814
Printed Date: 27 Feb 2025 at 1:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Snap coupler dimensions

Posted By: AaronSEIA
Subject: Snap coupler dimensions
Date Posted: 06 Mar 2011 at 7:38am

Over on the "other" site someone has asked about some SC equipment he has that has narrower lift arms than his WD. Can anyone here confirm that the CA and maybe smaller D series had narrower lift arms than the WD and bigger D? He said he's got a 2-12plow that measures about 3" narrower than his WD. Would like to help the guy out, but I'm not for sure.

AaronSEIA

Replies:

Posted By: Jim-Ohio
Date Posted: 06 Mar 2011 at 8:36am

The distance between the lift arms on a CA is less than on the WD-45. I had to modify the lift part on my snap-coupler blade to match up with the width of the lift arms on my CA. Also had to swap out the snap-coupler eye for a pin-hitch coupler from an old plow to fit my '51 CA with pin-hitch.

-------------
'61D17, '51WD, '51CA, '41C, '49C, Woods 5'&6'Mower, 6'Blade, CA-Plow, CA-Cultivator, 3-Btm snap-coupler plow, 4-row planter, WD 4-row cultivator, 80R mower,#7 mower,B/C mower