Looking for 8070 parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26754
Printed Date: 26 Feb 2025 at 10:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Looking for 8070 parts
Posted By: Dave in il
Subject: Looking for 8070 parts
Date Posted: 05 Mar 2011 at 12:26am
|
Does anybody have a source for a replacement seat or cushions that look like the originals?
Searched, but couldn't find the post.. didn't somebody post the website where you can buy lights for the 8000 series direct from the manufacturer?
|
Replies:
Posted By: Daehler
Date Posted: 05 Mar 2011 at 8:08am
|
Lights are about $55 for the rear and two out side fronts and 60 some odd for the two front inner lights. Thats from AGCO, its high but cheaper that 7000 series lights.
|
Posted By: DSeries4
Date Posted: 05 Mar 2011 at 11:06am
The factory lights are made by hobbs, and can be found on their website. Don't think you can buy them from their website though...
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: DSeries4
Date Posted: 05 Mar 2011 at 11:11am
http://content.honeywell.com/sensing/hss/hobbscorp/pdf/cat_oem.pdf - http://content.honeywell.com/sensing/hss/hobbscorp/pdf/cat_oem.pdf
Ball and socket type light on page 4 of the catalogue.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: bill2260
Date Posted: 05 Mar 2011 at 3:38pm
|
K and M in Minnesota should have a seat. Bill
|
Posted By: Unit3
Date Posted: 05 Mar 2011 at 3:47pm
|
Do you have a phone number for K & M? We need new seat covers as well.
|
Posted By: Amos
Date Posted: 05 Mar 2011 at 6:10pm
|
You can get the replacement lights from Shoup, that go right in the hobbs unit for less than the entire light assembly, which they also have.
|
Posted By: Dave in il
Date Posted: 05 Mar 2011 at 8:02pm
|
Thanks for the info on the lights.
I was on K&M seat website I replaced my 7060 seat with theirs, but I was wondering if anybody had similar material to the original?
|
|