Farm Equipment - hydraulic system flush ??

Print Page | Close Window

hydraulic system flush ??

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26207
Printed Date: 26 Feb 2025 at 4:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: hydraulic system flush ??

Posted By: bacon6
Subject: hydraulic system flush ??
Date Posted: 23 Feb 2011 at 6:03pm

I have a A C 5015 where the trans/hyd. are 1 system. they are contaminated with water, I've replaced the fluids and filter but still need to flush the system better, is there some kind of flush I can add to the system before draining the fluid again??

Replies:

Posted By: DougG
Date Posted: 23 Feb 2011 at 7:19pm

I,ve heard diesel fuel works , add some run it a little , pull the plugs and let it set a day to all drain out , never tried it but I think it would work

Posted By: Gatordoc
Date Posted: 23 Feb 2011 at 8:03pm

The heavy equipment shop i work with uses dexron atf to clean out water contaminated hyd and power shift trans systems

Posted By: KevinON
Date Posted: 24 Feb 2011 at 3:29am

Gatordoc, do you just put some in and run it like you would with diesel? How long?

Posted By: Gatordoc
Date Posted: 24 Feb 2011 at 6:45am

I cleaned a case loader trans with a blown trans cooler i filled it with 50/50 fuel and oil and ran it 10 min and drained and then did the same with ATF

Posted By: Gatordoc
Date Posted: 24 Feb 2011 at 6:47am

Be sure to run hyd functions when running to flush any cyls. and valves