Farm Equipment - 190xt brake componets

Print Page | Close Window

190xt brake componets

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26151
Printed Date: 29 Jul 2025 at 8:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt brake componets

Posted By: jngeorge
Subject: 190xt brake componets
Date Posted: 22 Feb 2011 at 9:05pm

190xt serial # 17368, I took left wheel off and pulled brake cover. The brake lininings are all but gone and the return springs are ground up to nothing. How many springs are there? There is alos a chunk broke out of the plate assy, its very small. I think it would be alright to put a new linning on it. Can someone help me with part numbers and a place to order these. I went to my local agco dealer and he was crazy with prices. $223 for linning, I knew this could'nt be right. I think I need a 1 new band, the drum linning, and the return springs. Thanks for the help. Justin George South Coffeyville, OK.

Replies:

Posted By: DSeries4
Date Posted: 22 Feb 2011 at 9:14pm

My former Allis dealer got aftermarket linings for a lot cheaper. Can't remember from where though.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: jngeorge
Date Posted: 23 Feb 2011 at 5:07pm

Found the linings and bands on ebay just need to make sure the part numbers are right. Cant find the return springs. Does anyone no where I can get them and how many there was in each side? I only see two per side in book. Looked like four per side ground up in the bottom of the drum. Thanks for helping

Posted By: jngeorge
Date Posted: 23 Feb 2011 at 8:26pm

Got everything but the return springs. Cant find them or part numbers. Need two for each side.

Posted By: darrel in ND
Date Posted: 23 Feb 2011 at 9:58pm

Justin, my local agco dealer had all the springs in stock. If you can't find them, let me know, I think he had some more still in stock. Darrel