Paging DR Allis 190 front cover
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26106
Printed Date: 26 Feb 2025 at 12:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Paging DR Allis 190 front cover
Posted By: boscoe
Subject: Paging DR Allis 190 front cover
Date Posted: 22 Feb 2011 at 7:33am
 
|
Replies:
Posted By: boscoe
Date Posted: 22 Feb 2011 at 7:35am
| Here are pics of both sides of front cover one side has an opening with cover on it other side looks normal to me , when i compare to my other 2800 engine dipstick is on opposite sides, what do you think. |
Posted By: DrAllis
Date Posted: 22 Feb 2011 at 7:49am
| I think you clearly have someones idea of making a diesel timing cover work on a gas engine !!!! There is no governor here to control the carb!! I have no idea what your plan is, but this isn't going to work (ever) the way AC intended. You can see the hole where the injection pump use to be has a homemade cover over it. The crankshaft pulley looks to be one from a combine because it has an empty wide groove for the hyd pump?? Eng dipstick under the carb is the way a combine was set up so it was easily accessible, but it will work on either side. |
Posted By: Good
Date Posted: 22 Feb 2011 at 8:09am
|
Bosco,Iam going to swap engines in my 190 this summer and am going to need a diesel cover cause mine is out of a combine. Iam taking out a gas so what about some trading? ------------- B212,716,two 314H's,WC,WD,D19,190XT |
Posted By: injpumpEd
Date Posted: 22 Feb 2011 at 10:20am
|
just put a gas pedal on the tractor! LOL! ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: boscoe
Date Posted: 22 Feb 2011 at 10:37am
| my intentions are to swap out the cover from a gas 2800 engine that does have a governor as it should, that I have sitting in my shed to replace this diesel engine front cover on this engine that is currently in the tractor . If this is in fact a combine engine than will the replacement of the cover work ok ? (without too many issues) |
Posted By: DrAllis
Date Posted: 22 Feb 2011 at 11:23am
| NO, NO and NO.....combine covers have no hydraulic pump drive !!!!! it has to be a GAS tractor cover to work on a tractor. |
Posted By: boscoe
Date Posted: 22 Feb 2011 at 8:09pm
| the engine i have comes from 190 gas tractor, that is the front cover i would use to replace the one that is on this combine engine, the engine that is in tractor now or maybe i should replace the whole engine since i cant get cam gear off. |