Farm Equipment - Fairbanks Morse mageto nose bearing

Print Page | Close Window

Fairbanks Morse mageto nose bearing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26004
Printed Date: 25 Feb 2025 at 5:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Fairbanks Morse mageto nose bearing

Posted By: Dave Everett
Subject: Fairbanks Morse mageto nose bearing
Date Posted: 20 Feb 2011 at 9:37am

Can anyone please tell me the bearing numbers for the nose bearing in fairbanks morse FMO and FMJ magnetos please?

regards

Replies:

Posted By: Dave Everett
Date Posted: 20 Feb 2011 at 10:07am

Fairbanks part number C 5949

Posted By: orangeman
Date Posted: 20 Feb 2011 at 10:22am

Hello Dave:

Here is what I have from my Fairbanks Morse Types FMJ4A and FMJ4B Magnetos Instructions and Parts List

C5949 Rotor Ball Bearing (Drive End) - Dave there is also another Bearing listed below that reference as follows

B5950A Rotor Sleeve Bearing (Oilite)

Not sure which one you need, but hope this is of use.

When you say nose, I am translating that to mean the driven end of the mag, which is behind the impulse coupling...

Let me know if you need more....

Posted By: orangeman
Date Posted: 20 Feb 2011 at 10:23am

Hello Dave:

Here is what I have from my Fairbanks Morse Types FMJ4A and FMJ4B Magnetos Instructions and Parts List

C5949 Rotor Ball Bearing (Drive End) - Dave there is also another Bearing listed below that reference as follows

B5950A Rotor Sleeve Bearing (Oilite)

Not sure which one you need, but hope this is of use.

When you say nose, I am translating that to mean the driven end of the mag, which is behind the impulse coupling...

Let me know if you need more....

Posted By: Dave Everett
Date Posted: 20 Feb 2011 at 10:35am

I have the FM number, but I am after the actual ball bearing number to order some from a bearing house here in England

Posted By: Gerald J.
Date Posted: 20 Feb 2011 at 10:41am

With dimensions you can down load a good bearing catalog from Baum Hydraulics (www.baumhydraulics.com) and search for the parts.

Gerald J.

Posted By: Dave Everett
Date Posted: 20 Feb 2011 at 11:12am

Hoffman N2448

Can anyone x reference that?

Posted By: orangeman
Date Posted: 20 Feb 2011 at 11:47am

Dave: I would try either Kaman bearing supply believe they are worldwide, or standard magneto in Chicago Illinois USA.