Farm Equipment - Need a part

Print Page | Close Window

Need a part

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=25842
Printed Date: 25 Feb 2025 at 6:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need a part

Posted By: DanD
Subject: Need a part
Date Posted: 16 Feb 2011 at 6:40pm

Looking for a part for an Allis rear mounted drill planter. It is the 7 tooth sprocket that goes on the shaft that drives the seed boxes. I believe the Allis number was 323942. They made some changes apparently around 1957 according to the parts book. The older planters had a different part number for this part. We need the newer one. If any one has a source of good used parts, that would be great, too. Thanks in advance.

Replies:

Posted By: 8070
Date Posted: 16 Feb 2011 at 9:11pm

is it the flat chain like the 72 unit used if so niel any have some . his # 618 282 2477

Posted By: Oldoug
Date Posted: 17 Feb 2011 at 8:31pm

The dealer locater shows that Scharter Imp. Inc. has part number 70323942 in stock. You may want to call ahead sometime inventories can be wrong. (902)-743-9281.

-------------
Matt Folkers

FOLKERS RESTORATION

Restoring vintage things to last so the future can enjoy our past.

Posted By: Chad(WI)
Date Posted: 18 Feb 2011 at 8:13am

Area code should be 920.....ask for Joe or Kevin.

Posted By: DanD
Date Posted: 18 Feb 2011 at 1:50pm

Thank you for the information everybody. Oldoug, can you give me more information about the website you used to find that part number at that dealership? Thanks in advance.

Posted By: Nathan (SD)
Date Posted: 19 Feb 2011 at 1:02am

Parts locator is part of the AGCO intranet.

Posted By: DanD
Date Posted: 19 Feb 2011 at 2:23am

Please tell me where in AGCO's website I can find this. I searched there for 30 minutes and didn't find a place where I could enter an old part number and then find a dealer that had that part in stock.

Posted By: Nathan (SD)
Date Posted: 19 Feb 2011 at 8:24am

Sorry I should have typed more. Oldoug works at a AGCO dealer in Nebraska. Parts Locator is only available to AGCO dealers. Dealers list their parts inventory on the intranet system and then other dealers can search eachothers parts inventories.

John Deere lets you search one dealer at a time on their jdparts.com but as far as I know AGCO has no feature like this.

Posted By: Oldoug
Date Posted: 19 Feb 2011 at 6:52pm

Nathan is right on, the dealer locator is an AGCO dealer look up only and not available to the public.

-------------
Matt Folkers

FOLKERS RESTORATION

Restoring vintage things to last so the future can enjoy our past.