Farm Equipment - D17 tach cable drive adaptor

Print Page | Close Window

D17 tach cable drive adaptor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=25594
Printed Date: 25 Feb 2025 at 9:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 tach cable drive adaptor

Posted By: Chris (swIA)
Subject: D17 tach cable drive adaptor
Date Posted: 11 Feb 2011 at 1:22pm

I need to repair or replace the adaptor that goes from the end of the govenor shaft to drive the tach cable? Does anyone have one that they would part with or has someone repaired one? The tach cable was gone when I got this tractor and I assume that the cable seized and that is what broke the tab off the end that fits in the shaft. This is on a series 1 gas with power steering.

Replies:

Posted By: paulinkansas
Date Posted: 11 Feb 2011 at 1:58pm

Search my old posts. I found one at Autozone. It was around 10 bucks. It wasn't in stock though, got it the next day.

Posted By: David(Stockbridge)MI
Date Posted: 11 Feb 2011 at 2:34pm

Have the complete 2 piece set in stock. The MSD8491 will not work because it only has a square hole. Stock cable has a key that fits into the adapter.

-------------
All "NEW" Web Site http://www.djstractorparts.com

2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler

Posted By: Chris/CT
Date Posted: 11 Feb 2011 at 3:49pm

I have a D-14 tach cable with a good end on it if that will help.