Fixed the snowblower
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=25554
Printed Date: 25 Feb 2025 at 5:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Fixed the snowblower
Posted By: kip in cny
Subject: Fixed the snowblower
Date Posted: 10 Feb 2011 at 2:57pm
I figured out the blower from help on here. I extened the skies out to 4 inches and extened the top link on the 3pt out to make it lean forward that streightned out my pto shaft to just a slight bend and it worked great I put on 4 hrs today triming back snow banks and did not snap a shear pin. Here is it is today in 3 1/2 ft of snow.  ------------- 160 CA 920diesel 5020 HD-3 |
Replies:
Posted By: dannyraddatz
Date Posted: 10 Feb 2011 at 5:17pm
|
It's some times in the fine tuning. Looks good and I'm sure your happy too. ------------- Danny Raddatz |
Posted By: jaybmiller
Date Posted: 10 Feb 2011 at 5:49pm
|
Nice, I'm happy you found the CAUSE and more importantly the CURE to the nagging problem.
I just spent 6 hours tearing the transaxle out of my riding snowblower(Cub Cadet lawn tractor, 42" blower) and welding up the shift fork that broke into 2 pieces.Only +10F here so I'm NOT going to test it for a few days. ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Orange Blood
Date Posted: 10 Feb 2011 at 5:56pm
|
Where can I get one of them tractors that does snow removal by ITSELF? ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: FloydKS
Date Posted: 10 Feb 2011 at 6:17pm
| Yea, I was athinking ya had to move pretty fast to get that far away from the tractor and still have some snow gettin blowd... |
Posted By: kip in cny
Date Posted: 10 Feb 2011 at 6:19pm
|
orange blood I did one of those osha approved moves low range rev. Its the only way I could get a photo by my self. when its 15 out with 10 mph winds the gal wont get out of the house ------------- 160 CA 920diesel 5020 HD-3 |
Posted By: CTuckerNWIL
Date Posted: 10 Feb 2011 at 7:02pm
|
Glad you got it working. Be careful doing those non OSHA approved things. I have a neighbor laid up from doing that. When he went to get back on the tractor his coveralls got snagged by the back tire, pulling him in and under the tractor and spitting him out the other side. Broke his left femur just below the ball. He now has a steel plate and a bunch of recovery and therapy to look forward to.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Pat the Plumber CIL
Date Posted: 10 Feb 2011 at 7:09pm
|
Glad you got it working Kip.I plan on getting snow blower and this info is valuable ------------- You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails 1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF. |
Posted By: Dakota Dave
Date Posted: 10 Feb 2011 at 8:43pm
My wife took pictures as I was finishing up today. WD45 with international model 70 blower.
|
Posted By: Eldon (WA)
Date Posted: 10 Feb 2011 at 8:49pm
|
Where are you guys finding all that white stuff? We started out setting records, but haven't seen any white stuff for over a month. I'm starting to think it might be spring one of these days! ------------- ALLIS EXPRESS! This year: |
Posted By: darrel in ND
Date Posted: 10 Feb 2011 at 8:54pm
| Yeah Eldon. You better get those white beets planted. Yuck! |
Posted By: DREAM
Date Posted: 10 Feb 2011 at 9:04pm
|
I'm soooo glad we're down here. Got a light dusting overnight. Warmed up pretty quick, so it was gone by noon. Not missing the 8"(had to be a record) we got last month. Stuff stayed around for a week. I was glad to see it go. Kip, glad to see you got everything working for you. Little nuisance problems like that will drive you bonkers, won't they?
Looks like she's doing a great job. Like Charlie said, be careful. Don't want YOU getting spit out that chute. ------------- I didn't do it! It was a short, fat, tall, skinny guy that looked like me! |
Posted By: Eldon (WA)
Date Posted: 10 Feb 2011 at 9:23pm
|
Darrel only 8 weeks away from planting those beets! You still have snow out there? It sure is nice to be livin on the west side of the Actic Express! Most of the time it misses us. Can't say I miss those subzero winter temps.... ------------- ALLIS EXPRESS! This year: |
Posted By: darrel in ND
Date Posted: 10 Feb 2011 at 9:40pm
| Yes Eldon, we have snow. If we get as much rain this spring and summer as we've had snow this winter, it'll be a bountiful year! Darrel |