Farm Equipment

Print Page | Close Window

valves

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=25465
Printed Date: 25 Feb 2025 at 3:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: valves

Posted By: Joel
Subject: valves
Date Posted: 08 Feb 2011 at 7:38pm

I thought i was doing something good, i set out to adjust the valves on my wd45, is there a proper procedure in doing this? For there is multiple "F" marks on the flywheel, which one do you use? Please help!!!

thanks joel

Replies:

Posted By: norm[ind]
Date Posted: 08 Feb 2011 at 7:49pm

i set mine cold.011take off plug wires when numb er one fires then set that cyl. an so on has always worked for us

Posted By: mlpankey
Date Posted: 08 Feb 2011 at 8:01pm

Dont worry about the firing Just adjust one cylinder at a time and here is the correct procedure to get it right on any engine with a solid lift cam shaft. For proper adjustment you have to adjust the intake valve when the exhaust valve starts to open . then set the exhaust lash when the intake valve is pushed all the way open and just starts to close.

-------------
people if they don't already know it you can't tell them. quote yogi berra