Farm Equipment - 226 govenor spring

Print Page | Close Window

226 govenor spring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=25355
Printed Date: 25 Feb 2025 at 12:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 226 govenor spring

Posted By: Allis Fields
Subject: 226 govenor spring
Date Posted: 06 Feb 2011 at 9:38pm

I think I know the anser but what is the rmp diference with a wd45 govenor/weights. Are the wd45, D-17, 175, gleaner E springs. I have a old wd spring I could take the plunger out and put into a E spring I have.

-------------
Allis orange blooded by family. Allis Diehard by choice

Replies:

Posted By: Kip-Utah
Date Posted: 06 Feb 2011 at 11:09pm

I have a WD45 governor with stock weights and D17 spring that will turn a little over 2100 rpms, validated by a good tachometer.

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!

Posted By: Darrell, Jr. (MN)
Date Posted: 07 Feb 2011 at 8:11am

I know if you go to an AGCO dealer they list a 226 spring rated at 1850 rpm. I bought one several years ago for our TL-10 loader.