Print Page | Close Window

WC rearend ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=25085
Printed Date: 24 Feb 2025 at 3:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: WC rearend ?
Posted By: Thad in AR.
Subject: WC rearend ?
Date Posted: 02 Feb 2011 at 7:20am
I have a WC non war rearend and have a question. At the lower part of the final drives are a set screw to hold the axle in place then right above the setscrew is a threaded hole. what's this hole for? They both drip gear grease.



Replies:
Posted By: Gary in Texas
Date Posted: 02 Feb 2011 at 7:42am
I thought that was a vent/drain hole.
If the seal leaks or get water in the brake area it will drain.


Posted By: Thad in AR.
Date Posted: 02 Feb 2011 at 2:09pm
Can I get all the seals to fix this from agco? The rear end and final drives are the only thing I haven't taken apart and checked out and cleaned. I can make the gaskets but not seals.


Posted By: Gary in Texas
Date Posted: 02 Feb 2011 at 2:11pm
I got the ones for my WC from Brenda, Sandy Lake imp.
and will need to get some more for the unstyled WC.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net