Injectors 301-426 sizes
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24881
Printed Date: 24 Feb 2025 at 12:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Injectors 301-426 sizes
Posted By: DougG
Subject: Injectors 301-426 sizes
Date Posted: 29 Jan 2011 at 6:40pm
|
Will injectors from a 426 fit in the head holes on a 301 head ? I need some cores , saw some on Ebay and they are to a 7060
|
Replies:
Posted By: AaronSEIA
Date Posted: 29 Jan 2011 at 8:43pm
|
Looking at a couple of tractors on the AGCO parts book page, they are different. Couple parts are the same but not the body. Would help to know which tractor.
AaronSEIA
|
Posted By: MACK
Date Posted: 29 Jan 2011 at 10:00pm
|
Yes the injector bodys are the same. The later 301s with the copper sleeves in head use a different cap to hold the tip to body but bodys are the same. MACK
|
Posted By: injpumpEd
Date Posted: 30 Jan 2011 at 1:04pm
pm me what you are wanting to do. 190XT through 7060 did use the same injectors on the Allis style, with the exception of the 2900MKII in 7000, 7010, 7020 etc with copper tubes in head like MACK stated. The return caps differ slightly too through the years, from being sealed with 2 copper washers, to an oring inside. It can be a little confusing when swapping things around. Let me know. Ed.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: injpumpEd
Date Posted: 30 Jan 2011 at 3:45pm
doug, tried to pm you, your box is full! Ed.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: DougG
Date Posted: 30 Jan 2011 at 4:04pm
|
Now its not , sorry bout that
|
|