Farm Equipment - Help 6070 engine issues

Print Page | Close Window

Help 6070 engine issues

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24815
Printed Date: 24 Feb 2025 at 5:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Help 6070 engine issues

Posted By: 1abfarmer
Subject: Help 6070 engine issues
Date Posted: 28 Jan 2011 at 12:02am

I just tore down my engine tonight, (water in oil) and found a pin-hole in #4 liner. But I was also blessed with the top half of the thrust bearing (crank wear edge) in the bottom of the oil pan. It looks like the crank is wore and dished out on the rear side of the thrust bearing (clutch end). So, the bearing are standard, crank hasn't been ground. What can I do, should I do? Do they make an oversized thrust bearings for end-play etc? This engine has the external thrust reducer on the front. What's next. Anyone have an engine or parts for this engine?

Thanks,

Shawn

Replies:

Posted By: Jim in MO
Date Posted: 28 Jan 2011 at 2:50am

call me 660 527 3512 or 660 460 0419 I can help Jim..