AC190 HighCrop - Model
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24580
Printed Date: 24 Feb 2025 at 3:02am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC190 HighCrop - Model
Posted By: Armand(AZ)
Subject: AC190 HighCrop - Model
Date Posted: 23 Jan 2011 at 10:10pm
I seen the picture of this highcrop here a while back and decided to build a model of it. I went with the fixed hitch that Henry posted info on to keep it simple, but it still ended up being a time consuming build. After cutting all of the unwanted stuff off the casting, I built the drop boxes, then turned the inside of the wheels so the dropboxes would be recessed like the real one. Then built the frontend, and turned the hubs for the rear wheels. Also added clutch and brake pedels, control levers, breather and exhaust. Hope you enjoy checking it out.
Armand
Here's the real one:
|
Replies:
Posted By: Eldon (WA)
Date Posted: 23 Jan 2011 at 10:30pm
Great job Armand....I'm sure you could sell a few of those!
------------- ALLIS EXPRESS! This year:
|
Posted By: Tracy Martin TN
Date Posted: 23 Jan 2011 at 10:32pm
Amazing as always. What a talent! Tracy Martin
|
Posted By: SHAMELESS
Date Posted: 24 Jan 2011 at 2:31am
Posted By: WD45
Date Posted: 24 Jan 2011 at 7:59am
THANKS Armand - that is a beautiful tractor.
------------- Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H
|
Posted By: Brian F(IL)
Date Posted: 24 Jan 2011 at 8:01am
Armand, you never cease to amaze me! What meticulous work; a fine job indeed!
Brian
|
Posted By: R.W
Date Posted: 24 Jan 2011 at 8:04am
MAN YOUR TALENTED!!
------------- In Search Of: 1958 Allis Chalmers D17 Diesel serial #9643D
|
Posted By: GregLawlerMinn
Date Posted: 24 Jan 2011 at 8:06am
Armand
Thanks again for sharing your gift with us.
------------- What this country needs is more unemployed politicians-and lawyers. Currently have: 1 D14 and a D15S2. With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
Posted By: TerryMtAuburnIA
Date Posted: 24 Jan 2011 at 8:17am
that is nice no very nice. how do you do it.
|
Posted By: Calvin Schmidt
Date Posted: 24 Jan 2011 at 9:10am
Another great job Armand!!!
------------- Nothing is impossible if it is properly financed
|
Posted By: acd21man
Date Posted: 24 Jan 2011 at 3:42pm
show us how u do this
------------- 2 wd 45,2 D-17 diesel/gas 3 pt, 220,d21, 4020,2 4430s used daily http://www.youtube.com/channel/UCudh8Xz9_rZHhUC3YNozupw
|
Posted By: CTuckerNWIL
Date Posted: 24 Jan 2011 at 3:49pm
Nice job again Armand.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: B26240
Date Posted: 24 Jan 2011 at 4:09pm
Posted By: Armand(AZ)
Date Posted: 24 Jan 2011 at 5:39pm
Thanks for the comments!!
acd21man: It would be difficult to explain, but if you go to my website and click the links to photos under each project most will give you a pretty good idea what's involved.
http://www.acmodelsofarizona.weebly.com - www.acmodelsofarizona.weebly.com
Armand
|
Posted By: Jacob (WI,ND)
Date Posted: 24 Jan 2011 at 9:10pm
As always Armand, Amazing!
------------- Jacob Swanson 1920 6-12; 1925,1926 20-35 longfenders; 1925,1926 15-25's; 1927,1929 20-35 shortfenders; C; B's; IB; WC's; WD; WD45
|
Posted By: AndrewGubbels
Date Posted: 24 Jan 2011 at 9:39pm
Looks great Armand!!!!!!!!!! I cannot wait to open your posts!!
Andrew
------------- Andrew Gubbels Gubbels Restoration
|
Posted By: AllisChalmers37
Date Posted: 25 Jan 2011 at 5:22pm
That is cool. If it was setting outside on concrete it would be really hard to tell it from the real one.
------------- 1937 WC, 1950 CA, 1959 D14, 1967 190XT, 2006 Ram 3500
|
|