murphys roller rockers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24569
Printed Date: 24 Feb 2025 at 12:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: murphys roller rockers
Posted By: wi50
Subject: murphys roller rockers
Date Posted: 23 Jan 2011 at 5:31pm
|
for those of you who have a set for the 201-226 heads,
I need to jockey some rocker ratios around. Is the shaft offset from it's original position twards the pushrod side of the head, or is it centered above the rocker arm studs like original?
in the pictures the stands use a top plate so I can only assume that there is a countersunk bolt holding the post to the head, and 2 bolts holding the halves of the stands togather.
Thank You
------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Replies:
Posted By: mlpankey
Date Posted: 23 Jan 2011 at 6:20pm
they are offset
 ------------- people if they don't already know it you can't tell them. quote yogi berra |