winter fixin!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24565
Printed Date: 24 Feb 2025 at 3:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: winter fixin!
Posted By: SHAMELESS
Subject: winter fixin!
Date Posted: 23 Jan 2011 at 5:08pm
|
who of ya'll have been busy this winter, gittin yer equipment ready for spring? what have ya'll done so far? me?? nuthin yet, been to danged cold here, and my shop isn't sealed off all the way yet. gonna work on it this spring, pour sum more concrete, hopefully dig out for a inside pit, then re-hang a new door on the building. my planter only takes about 1 hour to git ready for planting!
|
Replies:
Posted By: D17 owner
Date Posted: 23 Jan 2011 at 9:19pm
|
Well the kervernland (spelling) needs alot of parts. I wanted it in the shop and out by now but it is still in the shed. I put brakes on the 17. When I was doing that the 3pt went out on the MF 1105 took it all apart thought it was a stuck valve. Long story sort it is the hyd. pump Now that has to be split to get to it. the 17 is needs to go back in due to a bang in the trans. I redid my H and S bifold rake hoping to have that out this week. Also the disc needs some bearings. I have a heated shop but I get one thing done and two more break. I also have a fulltime job at the county shop. I think I have a weakend to work on some stuff it snows and I am at work.
|
Posted By: DREAM
Date Posted: 23 Jan 2011 at 9:25pm
Does thinking about working on stuff count? I have given some pretty heavy thoughts to how i'm going to get my new(to me) 2 bottom plow all reworked by spring. I have also given some thought to how i'm gonna get my C tuned up and ready to go swap out with my dad. That way, he can get his garden put in without having to get mom to pull his C off every time, and I can start the rehab on his tractor. Got it all planned out. Even got a little extra cash saved up for parts. Now i'm told i'll probably be working 6 or 7, maybe even 8 days a week for the next 53 weeks or so. LOL! Ain't that funny? Seems you always got either time or money, but not both?
-------------
I didn't do it! It was a short, fat, tall, skinny guy that looked like me!
|
Posted By: John In.
Date Posted: 25 Jan 2011 at 5:01pm
|
Brought my 1954 WD45 into the garage and R&R oil seal on right side carrier, R&R oil seal on gear shifter for the PTO , R&R packings in the hydraulic rams. Then put new oil in diff and tranny and hydraulic oil in torque housing. Adjusted brakes. Then broke the lens off head light, dropped it while I was tring to fix loose bulb.
|
Posted By: Billoh
Date Posted: 25 Jan 2011 at 6:00pm
|
Iam rebuilding a 250 chevy engine on my Gleaner K.
|
Posted By: GregLawlerMinn
Date Posted: 25 Jan 2011 at 7:33pm
Started out to fix up and paint a CA to replace my tired lawnmower CA. New brakes and pinion seals, rebuild the LH final (bad bearings and seals) and spend 3 days busting out a stuck brake drum in it, rebuild the hand clutch and actuator, new clutch/pressure plate/TO bearing, swap out a distributor and WFE. Still waiting for parts and machining of the hand clutch so I can start putting it back together (parts supposed to arrive before the end of the week). It will have plenty of new parts in it when done (and those who have been into one know how many $$). Barring any more surprises, expect to get it together in time to mow the grass next spring.
-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
|