Help 1940 WC Trans
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24410
Printed Date: 23 Feb 2025 at 11:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help 1940 WC Trans
Posted By: J. Barefoot/NC
Subject: Help 1940 WC Trans
Date Posted: 20 Jan 2011 at 5:10pm
|
The gears are locked up in the WC Speed patrol I got a few weeks ago. I took the gear lever out, someone had put a very small bolt to hold it in ( lot of flop ). There was like a small pin about 4 inches long on the side of the shift lever it seemed to be stuck and to far up the shaft , it came loose and I removed it. I cant get it to slide back up in the groove now. I took the top off the trans. The shifter forks are very hard to move. I can take a large screwdriver and force them back and forth. I would like a telephone number so I could call and dicuss my problems in more detail. Thanks , for any help you can give. J. Barefoot
|
Replies:
Posted By: CTuckerNWIL
Date Posted: 23 Jan 2011 at 6:46am
Do you have a repair manual? I was trying to post a picture of the shifter and rails but can't seem to get it done. The rod on the side goes to a reverse lock out and should continue all the way up to the shifter knob and attach to a small lever there. If it is getting stuck in 2 gears, the "ball" on the bottom of the shifter is probably worn to a point that it needs welded up or a replacement shifter.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
|