2wd 6080 frontend
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24341
Printed Date: 28 Sep 2024 at 8:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 2wd 6080 frontend
Posted By: allis6080
Subject: 2wd 6080 frontend
Date Posted: 19 Jan 2011 at 11:55am
|
would any one know were i could find a complete 2wd front end for a 6080? my spindle bushings are junk and the rest of the axle is extreamly loose!! or know of a way to put a narrow front end under it. I plan on pulling it alittle in farm stock class. thanks for any input.
|
Replies:
Posted By: Claus
Date Posted: 19 Jan 2011 at 1:36pm
|
Are the 6000 series and the later 170/175 axles the same or do they just look very similar?
|
Posted By: Craig/insoh
Date Posted: 19 Jan 2011 at 2:50pm
|
6080 has heavy duty front end others have same front as 175. We put a 6080 front on 175 after tierod failure while hauling a 2000 lb round bale. I had to make a set of bushings because 175 had smaller diameter pivot pin.
|
Posted By: BrianC,Ont
Date Posted: 19 Jan 2011 at 3:46pm
Someone suggested to me to put a pedestal and nf off of a D19 on the front of my 6080.
-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
|
Posted By: allis6080
Date Posted: 19 Jan 2011 at 4:24pm
|
so brianc,ont they said to basically take the whole narrow front end off a d-19
|
Posted By: BrianC,Ont
Date Posted: 19 Jan 2011 at 4:54pm
I had posted earlier that I wanted to make our 6080 4wd into a narrow front puller. And they said to use the D19 front pedestal and fab it to the 6080 frame rails. Or if you could find a 100 series pedestal and nf might work also. I am going to put a D17 wide front under ours because they wont let a nf front pull in the 6500 lb and over class.
-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
|
|