Farm Equipment - WD / WD45 I&T shop manual question

Print Page | Close Window

WD / WD45 I&T shop manual question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24314
Printed Date: 23 Feb 2025 at 6:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD / WD45 I&T shop manual question

Posted By: cbuttre835
Subject: WD / WD45 I&T shop manual question
Date Posted: 18 Jan 2011 at 8:39pm

Hi all

My dad was looking at an I&T manual for the WD / WD45 (and othes) at the local TSC the other day - the only one on the shelf that was sealed up. Rest were open and had been thumbed through.

Anyways, he asked if he could open it and look to see if it had info on how to take the slack out of the steering box; rather than spend the 35 bucks on it "blind" and take it home to find it does not have what he needed in it. He got told "if you look in it you bought it".

Anybody have one of these? If so, does it have good steering box info (for wide and narrow fronts)?

TIA....

-------------
C w/ 3rd gear out

D15 II factory 3 point

WD (no motor!)(parts for sale!)

WD 45 wide front

Replies:

Posted By: Steve M C/IL
Date Posted: 19 Jan 2011 at 12:14am

Can't answer your question now but I'll try to remember to look tomorrow.The one I have seems to be quite vauge on a lot of things.Not much of a manual in my opinion.If such a publication is still available through AGCO,that's where I'd buy.

Posted By: Don(MO)
Date Posted: 19 Jan 2011 at 6:23am

The IT books are good to get you in there and leave you high and dry. They do make a good fire starter. lol

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.

Posted By: Dakota Dave
Date Posted: 19 Jan 2011 at 7:31am

yes its on page 6 paragraph 2A & 2B,

Basicly shim to .001 to .002 end play.

with drawings.