Farm Equipment - Rebuilding 200 power director clutch

Print Page | Close Window

Rebuilding 200 power director clutch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24285
Printed Date: 25 Sep 2024 at 11:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Rebuilding 200 power director clutch

Posted By: Sam T-Ga
Subject: Rebuilding 200 power director clutch
Date Posted: 18 Jan 2011 at 1:41pm

I am rebuilding PD clutch in a 200. The 2 driving hubs that drive the clutch disc have little worn spots where the disc spines engage to hubs. My question is how much wear can these hubs have and still be usable? Thanks, Sam

Replies:

Posted By: Dans 7080
Date Posted: 18 Jan 2011 at 1:57pm

I rebuild my D17 clutch a few years ago. The dealer recomemded replacing them with very little wear. He said the discs can bind in the grooves if under a load, and wont shift smooth. If i can find the old gears il try and measure the difference.

Posted By: skipwelte
Date Posted: 18 Jan 2011 at 4:45pm

If youve got over 3/32 deep wear groove sId look at replacements. The discs need to slide a little on the hubs, with to much groove they can bind which accelerates wear on the clutch splines themselves. Hope its warmer down there than it is here +5 right now. HTH

Posted By: DrAllis
Date Posted: 18 Jan 2011 at 4:48pm

I'd replace all 9 discs with new 70261212 discs from a 7000....they will never break....put them in my Dad's 200 in 1979 and still works well to this day.