Farm Equipment - 1492 tiller ? need parts please help!

Print Page | Close Window

1492 tiller ? need parts please help!

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24263
Printed Date: 23 Feb 2025 at 6:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1492 tiller ? need parts please help!

Posted By: sb47
Subject: 1492 tiller ? need parts please help!
Date Posted: 17 Jan 2011 at 11:52pm

Hi everyone

I am new to the site and I came here looking for an answer and I am hopping someone can help me find some parts to an old Allis Chalmers #66 3 point tiller. Model #1492

I am looking for the idler bearing and triangular bearing flange for the right side of the tiller where the tine shaft is located. The flange and bearing bolt to the side of the tiller body and the tine shaft goes into it.

I also need a set of new tines plus possibly a drive chain if I cant locate the one that came with the tiller.

Is there a site where I might be able to look up the model number and find the right part number for the bearing?

The bearing and flange was lost in the dirt in a large field so I don’t have the part in hand to match it up to a new one.

Any help would be greatly appreciated as I can’t afford a new tiller.

Thanks in advance Dennis

Replies:

Posted By: Jim NEIN
Date Posted: 18 Jan 2011 at 4:03am

Welcome, any dealer should have a bearing and flange if u know the shaft size.Cant tell what size chain without seeing the sprocket.Good luck.