Farm Equipment - WIDTH OF 7060 WITH LONG AXLES

Print Page | Close Window

WIDTH OF 7060 WITH LONG AXLES

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24023
Printed Date: 23 Feb 2025 at 11:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WIDTH OF 7060 WITH LONG AXLES

Posted By: SIMPLICITY
Subject: WIDTH OF 7060 WITH LONG AXLES
Date Posted: 13 Jan 2011 at 7:33pm

HOPING TO MOVE A 7060 THIS WEEKEND , NEED ACTUAL WIDTH @ THE END OF THE AXLES, THIS TRACTOR HAS THE LONG AXLES. NEED INFO FOR OVER WIDTH PERMIT. THANKS THAD

Replies:

Posted By: MUM FARMER
Date Posted: 13 Jan 2011 at 7:50pm

Iam not possitive But two choises 96inches were the shorts or optional 120inch so aleast 10ft if the outer edge of tires arnt beyond the tip of the axels

Posted By: SIMPLICITY
Date Posted: 13 Jan 2011 at 7:54pm

THE DUALS ARE REMOVED ONLY AXLES STICKING OUT.

Posted By: Russ-neia
Date Posted: 13 Jan 2011 at 9:16pm

Operator's book says 119.5" to ends of wide axles.

-------------
The innovators offer what others will imitate.

Posted By: Dave King
Date Posted: 13 Jan 2011 at 9:22pm

120" or 119.5" is correct for the long axles ( I went out and measured)

Posted By: Unit3
Date Posted: 13 Jan 2011 at 9:29pm

Does she have the spinout dauls on the "Mexican Hat" castings?