Farm Equipment - 500 loader question?

Print Page | Close Window

500 loader question?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23855
Printed Date: 23 Feb 2025 at 12:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 500 loader question?

Posted By: Tracy Martin TN
Subject: 500 loader question?
Date Posted: 10 Jan 2011 at 10:54pm

What do the spacers for a 500 series loader look like for a 170? How thick are they? Manual mentions them, but no pictures of them. I realize they will go only one way correctly per manual. Any help appreciated. Tracy Martin

Replies:

Posted By: Michael Crowe
Date Posted: 11 Jan 2011 at 12:27am

Tracy, for a d19, the spacers are 1/2" thick and I was told they were 2" x 4". On a 19, the front has to have the hole slightly off center to clear a bolt head. I seem to recall a book or something listing those deminsions.

-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/

Posted By: Tracy Martin TN
Date Posted: 11 Jan 2011 at 8:57am

Michael, Thanks for info. What is the width of a 190,180,and 170? If loader frame and booms are the same,shims would be needed on the smaller two, to take up space. Thanks again, Tracy Martin