Farm Equipment - D10 series III muffler

Print Page | Close Window

D10 series III muffler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23841
Printed Date: 26 Sep 2024 at 1:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D10 series III muffler

Posted By: Thomas-NC
Subject: D10 series III muffler
Date Posted: 10 Jan 2011 at 7:17pm

Anyone know where to get the correct D10 Series III muffler with the mount made on the muffler that attaches to the manifold? I have tried Tony`s where I got one several years ago. He does not have them now.

Replies:

Posted By: Thomas-NC
Date Posted: 10 Jan 2011 at 8:54pm

ttt

Posted By: easygoin4
Date Posted: 11 Jan 2011 at 12:47pm

I too have been thinking of getting one. I have an I-40 with OVAL cutout in hood and looks like the manifold had some sort of bolts to attach to a Muffler at one time.

Also looking for a new manifold, I know new they run over 200.00.

Right now there is a straight muffler on her.

Need to start saving my pennies..

Posted By: Thomas-NC
Date Posted: 11 Jan 2011 at 12:59pm

I have been trying to get some info on the Nelson muffler. I think they use to make the correct muffler for the Series III. No luck so far. It appears they may have been bought out by Fleet or someone.

Posted By: Thomas-NC
Date Posted: 11 Jan 2011 at 1:43pm

Just found out the AC 17 muffler is still available from Stanley muffler with the 2 bolt mount welded on according to Stan Hubbard, VP of Stanley Muffler. I don`t know what country it is made in. I know some folks say they don`t sound right. I would rather have the Nelson or the original AC muffler, but that is not happening as I can`t locate one.

Posted By: ALinIL
Date Posted: 11 Jan 2011 at 4:30pm

You guys might try this site. You will need to know your sizes. look under Muffler specs by part number.

http://www.walkerheavyduty.com/catalog/catalog_default.asp - http://www.walkerheavyduty.com/catalog/catalog_default.asp

Posted By: Thomas-NC
Date Posted: 11 Jan 2011 at 7:04pm

Thanks, I will give it a go.

Posted By: TMiller/NC
Date Posted: 11 Jan 2011 at 7:17pm

Thomas, welcome to the NC delegation of the forum, sorry I don't have an answer for your question. There is a wealth of information here on most any subject, especially AC. Tim

Posted By: Thomas-NC
Date Posted: 11 Jan 2011 at 10:37pm

Thanks Tim. I have been gleaning info from here for a while. Lots of knowledge here on the orange.

Posted By: J. Barefoot/NC
Date Posted: 12 Jan 2011 at 12:44am

Hi Thomas, we are near the same area, I am about 25 miles away. I will look for one. Welcome to the Forum

Posted By: Thomas-NC
Date Posted: 12 Jan 2011 at 5:17am

Thanks Mr. Barefoot, My Post Office is Pikeville, but I live close to Princeton, NC. Thanks for the help.

Posted By: Thomas-NC
Date Posted: 12 Jan 2011 at 7:22pm

I got a reply from the Walker Heavy Duty muffler rep. They don`t have a replacement for the series III and do not have a muffler with the same measurements as the original . Check the online catalog myself also. I guess the AC 17 from Stanley is the only one left to fit the D10 series III.

Posted By: norm[ind]
Date Posted: 12 Jan 2011 at 7:38pm

we have the STANLEY IN STOCK 1-800-254-3116