hyd question, 190 xt
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23643
Printed Date: 22 Feb 2025 at 11:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hyd question, 190 xt
Posted By: darrel in ND
Subject: hyd question, 190 xt
Date Posted: 07 Jan 2011 at 10:40pm
| Just wondering how to set up the hydraulic detent on my 190 xt. I am now pulling a feeder wagon with it that has a hydraulic driven discharge chain, and I need the one hydraulic remote to stay engaged without holding it. I'm not talented enough to hold the hydraulic lever back, operate the pd clutch, and steer it all at the same time. Using a tarp strap for now, but I don't like that just because it ain't right. Thanks in advance, Darrel |
Replies:
Posted By: DaveCinIN
Date Posted: 07 Jan 2011 at 11:34pm
| Switch your hoses around and push the lever all the way forward. |
Posted By: SHAMELESS
Date Posted: 08 Jan 2011 at 1:46am
| i move the lever all the way forward too, also put a tarp strap on for "just in case" |
Posted By: DrAllis
Date Posted: 08 Jan 2011 at 6:21am
| Under the platform (directly underneath the console) you find the control valve and remove the rubber plug and using a small flat blade screwdriver tighten the detent screw until it is enough to keep the lever from popping out (do this in the "hold" position). This is outlined in an owners manual for the tractor. |
Posted By: darrel in ND
Date Posted: 08 Jan 2011 at 10:42am
| Dave and shameless, all of the way ahead does lock in, but that is the "float" position. I'm going to find the detent screw and tighten it up. Thanks for responses. Darrel |
Posted By: Skyhighballoon(MO)
Date Posted: 08 Jan 2011 at 11:02am
This is off a 200 but should be almost identical to a 190XT. You can see the rubber plugs on the 3 spools in the pic. Mike ------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |