tranny
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23326
Printed Date: 22 Feb 2025 at 10:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: tranny
Posted By: SHAMELESS
Subject: tranny
Date Posted: 03 Jan 2011 at 1:30am
|
what tractors rear ends/transmissions will interchange with a black belly 7080?
|
Replies:
Posted By: SHAMELESS
Date Posted: 03 Jan 2011 at 1:30am
Posted By: Dans 7080
Date Posted: 03 Jan 2011 at 1:38am
|
7030 7040 7045 7050 7060 will interchange but they wont be the same. The 7080 had a heavier, lower geared rearend
|
Posted By: SHAMELESS
Date Posted: 04 Jan 2011 at 3:31am
|
sooooo....the 7080 was all it's own?
|
Posted By: SHAMELESS
Date Posted: 04 Jan 2011 at 3:33am
|
i have a 7060 rear end/tranny in my 7010 from the factory.
|
Posted By: dpower
Date Posted: 04 Jan 2011 at 3:52am
|
You working night shift too shameless lol
|
Posted By: SHAMELESS
Date Posted: 05 Jan 2011 at 12:26pm
|
yeah..."c" shift and sometimes beyond
|
Posted By: dpower
Date Posted: 05 Jan 2011 at 3:04pm
|
I just got back to nights now we switch ever 4 months. My first night back was new years eve what a blast lol.
|
Posted By: DrAllis
Date Posted: 05 Jan 2011 at 3:27pm
|
You could use a 7045-7060 rearend and then transfer the axles and final drives over from the 7080 and it would be the same. About that 7010 with a 7060 rearend....came like than from Milwaukee??
|
Posted By: SHAMELESS
Date Posted: 06 Jan 2011 at 1:36am
|
yeah doc! when it arrived, them little sprigs in the clutch plate were loose and rattling, sounded real bad for a new tractor, as it echo'd thru out the whole tractor. sooooo...the dealer i was with at the time split it to replace that plate while on warranty. that's when we found out about the rear end/tranny! none of the parts they ordered for the 7010 would fit, all to small. after that, i've recieved a bunch of calls from other dealers and others as they wanted that tractor for a pulling tractor! one dealer offered me a brand new 8010 in exchange for my 7010! i thought about it, then thought that i shouldn't ever have a problem with this larger rear end/tranny with the hp in front of it...and i haven't! so i kept the 7010. i still have standing offers for that tractor! if i ever want to sell it!. thanks doc for the info!
|
Posted By: SHAMELESS
Date Posted: 06 Jan 2011 at 1:38am
|
dpower...we just had a shift bid today, i chose "c" again! good for another year! if i don't retire this year! i have the years in! dunno yet!
|
Posted By: SHAMELESS
Date Posted: 06 Jan 2011 at 1:41am
|
sure would like to go campin with the ole lady....ooops...i mean my loving wife...on the weekends again! i get weekends off every 3 months. but gotta find the dang short that's in the motorhome first...it's driving me nutso!! whew!
|
Posted By: SHAMELESS
Date Posted: 06 Jan 2011 at 1:45am
|
oh yeah...doc...seems the low side of the tranny is out, i still have the high side, and disk in the high side, but it's a gear to fast unless i pull the throttle back, which has worked for the last 8 years or so. so that's why i'm asking if like 7060 guts would be the same as the 7080 guts? this tractor is only used with the disk, never gets unhooked.
|
|