Print Page | Close Window

Allis-Chalmers spreader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23044
Printed Date: 20 Feb 2025 at 1:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Allis-Chalmers spreader
Posted By: RSponenberg
Subject: Allis-Chalmers spreader
Date Posted: 29 Dec 2010 at 5:59pm
I have an Allis-Chalmers manure speader ground driven rear beaters that is usable but needs some attention!!! Are parts available from Agco,or do I need to comb the headgrows.. Need the star wheel on the axle that drives the apron chain and the bearings for the beaters....
Thanks Rob



Replies:
Posted By: Oldoug
Date Posted: 29 Dec 2010 at 8:26pm
I restored a A-C 281 spreader 2 years ago and I ended up making 72% of the parts for the restoration.  You might be able to get the bearings from AGCO but most anything else they had for parts AGCO scrapped do to low sales.

-------------
Matt Folkers

FOLKERS RESTORATION



Restoring vintage things to last so the future can enjoy our past.


Posted By: RSponenberg
Date Posted: 30 Dec 2010 at 6:15pm
Star wheel is whats going to be a problem,worn hard ,apron chain wont run unless the lever is all the way down and then its not great...



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net