b oil pan
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22959
Printed Date: 18 Feb 2025 at 7:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: b oil pan
Posted By: john2189
Subject: b oil pan
Date Posted: 27 Dec 2010 at 11:56pm
|
Can the oil pan come out without removing the front axle from my B ? Its a cast iron pan if that makes a differance. it is leaking bad and I want to replace the gasket.
John ------------- '41 Allis B '45 Allis B '49 Farmall Cub '72 IH Cub |
Replies:
Posted By: MilesGray (CO/KS)
Date Posted: 28 Dec 2010 at 12:49am
|
Yes it can. The hardest part is getting to the bolts that are back inside the bell housing. Once you get those out and the pan loose, move the pan forward, drop the rear portion and slide it out. ------------- Miles Gray (CO/KS) 5 1938 B's, 1940 B, 1944 WF C, 1948 NF C, Gleaner A, White Top Rotobaler, 1957 IH Golden Jubilee... I'm either a collector, or crazy! |
Posted By: Dick L
Date Posted: 28 Dec 2010 at 10:52am
|
Some will come out without moving the pivot plate forward some and some will not.
I have had several B's that the pan would not come out any which way it was wiggled. I posted pictures a while back of pans that were slightly different/longer on the corners.
|
Posted By: GBACBFan
Date Posted: 28 Dec 2010 at 4:58pm
I would add the style of cast iron pan is a factor as well. Here are three of the different styles I'm aware of.
 ------------- "The trouble with quotes on the Internet is that you can never know if they are genuine." - Mark Twain |
Posted By: john2189
Date Posted: 28 Dec 2010 at 9:16pm
|
I think mine is the one to the far right ------------- '41 Allis B '45 Allis B '49 Farmall Cub '72 IH Cub |