Farm Equipment - Exhaust Manifold Gasket on 8010

Print Page | Close Window

Exhaust Manifold Gasket on 8010

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22737
Printed Date: 13 Feb 2025 at 1:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Exhaust Manifold Gasket on 8010

Posted By: StewartMD
Subject: Exhaust Manifold Gasket on 8010
Date Posted: 23 Dec 2010 at 6:51am

Any tips, tricks, or suggestions for putting on a new replacement gasket on our 8010? We are starting to soak up the nuts with PB blaster now, with hopes of doing this over the weekend. Thanks. Josh

-------------
8030, 8010, 220, 185, 160, D-17, WD, Unstyled WC, CA, G, 20-35, Gleaner E

Replies:

Posted By: Amos
Date Posted: 23 Dec 2010 at 7:28am

I was able to do the last two by not having to remove the manifold/turbo/etc by just loosening the clean air turbo line tot he intake manifold and taking the bolts out and replacing the blown gaskets. On both some of the bolts were loose, and the one gasket was rusted/ thinned right through.