Are my front hubs messed up?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22359
Printed Date: 27 Sep 2024 at 2:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Are my front hubs messed up?
Posted By: paulinkansas
Subject: Are my front hubs messed up?
Date Posted: 15 Dec 2010 at 4:27pm
|
This is a follow up to my post yesterday. The front rim on my D17 w/ loader is going bad. The rim only has 10 hours on it. Here is a picture of the hub. There is a 1/4" groove on the hub where it makes contact with the center hole of the hub.
Shouldn't it be smooth? Can I fill it in with a mig welder?
  |
Replies:
Posted By: ChuckLuedtkeSEWI
Date Posted: 15 Dec 2010 at 4:38pm
|
Yes, your hub is shot. It looks like someone ground out around the edge of it for a wheel with a larger center hole, which isn't right. I will take a picture of a good hub that I have and send it to you. I do have a good set of hubs here and a good wheel also if you're interested in them. I will get a picture loaded up. ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: ChuckLuedtkeSEWI
Date Posted: 15 Dec 2010 at 4:45pm
Here is a picture of a good hub. Notice how the center section is even with the dust cap so that there is a good spot for the rim to ride on.
 ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: ChuckLuedtkeSEWI
Date Posted: 15 Dec 2010 at 4:47pm
|
If I were you, I would look at the other one and make sure that one is not modified or buggered up too. If you need a set, let me know. I know I have a couple good rims around here. One or two are a little rusty, but I know I have one good one that must have been a replacement rim as it is like new. The tire on it is junk though so I would have to demount that. Let me know if your'e interested. ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: michaelwis
Date Posted: 15 Dec 2010 at 5:05pm
|
i dont know where my dad got them but years ago he repaced our D15 series 2.... hubs and rims with the 6 hole variation .. much heavier ------------- WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60 GLEANER F 6060 7040.and attachments for all Proud to be an active farmer |
Posted By: ChuckLuedtkeSEWI
Date Posted: 15 Dec 2010 at 5:07pm
|
D15's came with 6 hole hubs as well as 5 hole, cause the set on my D15 are 6 hole. Thanks Michael, you gave me a good idea of where to borrow a good set of rims/tires for my D17 so I don't have to buy a new set right away!! ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |