Farm Equipment - 7040 PTO?

Print Page | Close Window

7040 PTO?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22217
Printed Date: 13 Feb 2025 at 1:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7040 PTO?

Posted By: dualquads
Subject: 7040 PTO?
Date Posted: 12 Dec 2010 at 10:38pm

Did all 7040's have the reversible 540/1000 rpm PTO? Mine has always had the 540 out and I'm considering buying a rotary chopper with 1000 rpm.

Replies:

Posted By: Wes (VA)
Date Posted: 12 Dec 2010 at 10:52pm

540/1000 was standard, with 1000-only being an option. So you should have 1000 PTO, just remove the six bolts, pull the pto shaft out and flip around and install bolts in the inner bolt pattern..you can only get all bolts in with shaft lined up one way. Then crawl underneath and lengthen the drawbar. -Wes