Farm Equipment - 210,220,d21 drawbar

Print Page | Close Window

210,220,d21 drawbar

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22097
Printed Date: 22 Nov 2024 at 9:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 210,220,d21 drawbar

Posted By: riggs
Subject: 210,220,d21 drawbar
Date Posted: 10 Dec 2010 at 5:01pm

was wondering if anybody has a drawbar that is in decent shape. Tried Mark Heittman, northside, meyers, abalene,aberrdeen and colfax with no luck. The one we had some low life stole while we were getting it painted in New Vienna! Have come up with nothing and the next option is to try and have one fabricated if possible. Any help would be greatly appreciated!!!

Replies:

Posted By: Tony.Or
Date Posted: 10 Dec 2010 at 5:39pm

Riggs ! I will check with my supplier , i think they had some made a while back. Tony

1-877-602-3994

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com

Posted By: Allismom
Date Posted: 10 Dec 2010 at 7:41pm

Did you try Larry Swenson 1-507-787-2338 he just junked out a D21

Posted By: Amos
Date Posted: 11 Dec 2010 at 4:16am

Get one made. I have had a couple made, took the bend down out of it and went straight through. It makes a big improvement for the implements we pull with it since. Mine were so old and bent out of shape they would not stay the way the had been made originally when we "straightened" them back.

Posted By: injpumpEd
Date Posted: 11 Dec 2010 at 8:59am

A 7000 series drawbar can be modified to work, it's straight so it will raise up your hitch point. Thats what I did on my puller, and I do still have the stock one if interested. Ed.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: Steve M C/IL
Date Posted: 11 Dec 2010 at 10:11am

The one on my 220 was welded back together.Never trusted it.Got a green one on it now.Had to drill a hole in the pull end for length.Runs straight accross bail then drops about 1 1/2in.

Posted By: ILGLEANER
Date Posted: 11 Dec 2010 at 10:21am

Steve you didnt trust that,so you put a green one on and you trust the green one to hold the orange power??

-------------
Education doesn't make you smart, it makes you educated.

Posted By: Steve M C/IL
Date Posted: 11 Dec 2010 at 10:33am

The price was right and the height is better.....and that was long before the "forum" so I wasn't so sensative to color.What can I say?

Posted By: Hurst
Date Posted: 11 Dec 2010 at 1:48pm

The 7000 model has a curved drawbar that is below the drawbar bail. It looks pretty similar to the one on the D21 looking at pictures, but I wouldn't know without actually measuring one up.

https://www.allpartsstore.com/Search.htm?CategorySeq=B&SelcBrand=AC&SelcMachn=TRACTOR&SelcModel=7000&SelcSectn=HPT&SelcSubsc=P45 - https://www.allpartsstore.com/Search.htm?CategorySeq=B&SelcBrand=AC&SelcMachn=TRACTOR&SelcModel=7000&SelcSectn=HPT&SelcSubsc=P45

It's the same one as 3pt models of the 190xt and 200 according to the website. My only consideration would be the drawbar thickness compared to the original D21, but it is thick enough to comfortably handle a 20 ft batwing (flexes a little, but not too bad). Just thought I would put something else out there.

Hurst

-------------
1979 Allis Chalmers 7000
5800 Hours

Posted By: Ray
Date Posted: 12 Dec 2010 at 9:41am

$300.00 Good,used,original. 785-353-2392

Posted By: injpumpEd
Date Posted: 12 Dec 2010 at 12:20pm

I'm open to reasonable offers, and I'm in ILLINOIS. Take a drive, just not today LOL!

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: ncpackfan39
Date Posted: 05 Oct 2024 at 11:52pm

I’m looking for a D21 drawbar. Original Part number 239941. If anyone has a descent one they are willing to part with, please let me know at 919-273-6643. Thank you.

-Q

Posted By: Straanger
Date Posted: 06 Oct 2024 at 10:43am

This thread is 14 years old. Start your own.