HD6-G Counterweight
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21922
Printed Date: 31 Oct 2025 at 7:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6-G Counterweight
Posted By: orangeman
Subject: HD6-G Counterweight
Date Posted: 07 Dec 2010 at 8:00am
|
Guys: Do any of you know the part number or have a photo of the counterweight used on the venerable HD6-G machine?
I would like to try to find one or two near the east coast if possible. Thanks Orangeman.
|
Replies:
Posted By: Coke-in-MN
Date Posted: 07 Dec 2010 at 10:14am
Same as the HD5G
-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.
|
Posted By: Gary(WI)
Date Posted: 07 Dec 2010 at 4:18pm
|
We have 2 of them off of the back of an hd-5 Will try and get you some pictures might be hard to get them home We are in EWI Gary Roidt 920 253 8192 they are probably buried in snow
|
Posted By: dadsdozerhd5b
Date Posted: 07 Dec 2010 at 5:19pm
|
where are you on the east coast? i think i have one from a hd5 which is the same. i am in lansdale pa.
-------------
HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE.
|
Posted By: orangeman
Date Posted: 08 Dec 2010 at 4:21pm
|
Guys: I know your busy with the Holiday seasons, I can wait on the pics. But still would like to see them sometime. I have seen at least two different sets of weights. What manual were the dozer weights covered in?
Coke do you still run your HD 5 or did you part with it for the FiatAllis FD5?
I am in New York State.
|
Posted By: acisbest
Date Posted: 09 Dec 2010 at 10:31am
Posted By: mudder45
Date Posted: 12 Dec 2010 at 8:03pm
Hi guys, I have a complete AC 1967 HD6G for sale for parts .everything works and runs, Motor knocks, extra parts motor w/everything that hangs on it, starter, pumps, injectors etc. . bucket has teeth. extra fiber steering clutch discs. owners manual, shop manual, parts number catalogue. new heavy duty bateries. you can click on the big and ugly to see a picture @ www.equipfind.com/heavyequipment/1967AllisChalmersHD6G
Saratoga NY area. I wish to sell it as one unit rather than part out. The old picture is from an old add I put out. Price, $4000.00 Rick 518-793-5273 or manyflags@capital.net
|
Posted By: dadsdozerhd5b
Date Posted: 14 Dec 2010 at 4:48am
i am thinking $200.00 for the counterweight. i also have a winch on my hd5g that will fit, carco brand, any interest in that instead? i am thinking $800 for that. thanks
-------------
HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE.
|
Posted By: mudder45
Date Posted: 14 Dec 2010 at 1:35pm
|
With the winch you shouldn't need a counterweight. The winch is usually enough to counterweight. mudder
|
Posted By: Coke-in-MN
Date Posted: 14 Dec 2010 at 3:55pm
|
I still have 1- HD5G, and the FD5 F/A , on the counter weights there were a couple different ones. One set I seen on machine in Iowa had the AC logo cast into it.. My 5 has 2 weights (both seems same size).
Counterweights could be low grade iron and in many cases will not sell even for scrap price. Friend had some from crane he scapped , had to haul to landfill.
Believe the weights and attachments were in TS5 parts book. Somewhere i have that ?? burried somewhere ?? Like the 20" of wind swept and drifted sonw over weekend kind of puts everything on hold .
-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.
|
Posted By: Coke-in-MN
Date Posted: 16 Dec 2010 at 6:32pm
|
I was just noticing the counter weights on my HD5G are 2 different sizes , dang owned it for over 30 years and just learned something new. Inside weight is 1/3 thicker than back outside one. Inside weight has a cut out (but not full depth of the weight) on top to allow a chain hook to index with top lift pin that is across that slot. Outside weight is open across top to expose the full pin with it's cutout. Part # cast into outside weight but did not write it down and memory faded.
Went to move it today to clear snow and ran for 5 minutes and filters pluged up , so another job to do .
-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.
|
|