Farm Equipment - Removing cab from a 7020?

Print Page | Close Window

Removing cab from a 7020?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21858
Printed Date: 12 Feb 2025 at 10:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Removing cab from a 7020?

Posted By: KevinON
Subject: Removing cab from a 7020?
Date Posted: 06 Dec 2010 at 9:05am

Is it a big job to lift the cab off of a 7020? I can get it in my shop without the cab, otherwise I have to find another place to do the motor job in it. I am thinking that I could refurb the cab while it is off of the tractor. Thanks!

Replies:

Posted By: MikeKroupa
Date Posted: 06 Dec 2010 at 9:46am

If you are going to do an out of frame rebuild, split it outside and roll the front half inside. , Mike

Posted By: niel ev
Date Posted: 06 Dec 2010 at 9:48am

Kevin its not an eazy job you have to take the cab mounts off the axle or the 4 bolts off the cab then in the cab there are I think 4 half inch bolts and 3 3/8s bolts that have to come out and if you are thinking about taking the steering colunm withit there are 3 other bolts under it and all the wires and 4 brake lines that have to be removed if you have a queston call 1 618 282 2477 and I can explain it a little clearer on the phone Niel

Posted By: KevinON
Date Posted: 06 Dec 2010 at 1:14pm

Thanks, Neil!